This model is specially designed for weaving fiberglass, its machine frame is optimized, and more suitable for operation. Model features: electrical or mechanical let-off, mechanical take-up, beating with four-shedding levers, electronic feeder with single or double nozzle, and the innovated big pneumatic square roller bracket, all facilitating the weaving production. Max. take-up diameter 600mm(1000m) or 1000mm (for about 2000m) if using separate rolling device. Weft insertion method: main and auxiliary nozzles plus unusual reed. Main and auxiliary nozzles controlled by electromagnetic valve. Lower cutter: Chop-cut scissors and equipped with powerful dust-collection system
This model can weave varnish cloths, laminated cloths, and CCL cloths with density of 50g m2—300g/m2,with the characteristics of low noise, smooth running, energy efficient, and cost-effectiveness
ITEM | MA712 glass fiber weaving AIR JET LOOM |
Reed width | 135, 150, 190cm |
Weft selection | single or double electronic feeder |
Power | Electromagnetic brake to brake and stop at required angle. |
Motor | 1.5kw, 1.8kw |
Speed | 400-700rpm |
Weft insertion | Main and auxiliary nozzles with specially designed reed, controlled by electromagnetic valve |
Beam flanger diameter | Φ800mm / Φ914mm; |
Shedding | Crank shedding |
Left-off | mechanical or electronic let off |
Take-up | inside or outside the machine body |
Selvage | By planetary gear |
Cutter | Mechanical scissors |
Automatic stop system |
Weft stop: 2 photo-electric feeler. Warp stop: 4 or 6 lines electronic control |